Delta Tau PMAC2 User Manual download pdf (Page 31)

Turbo PMAC2 Realtime Express Controller

Software Setup

Click Insert.

Select the communication port from the list. All the available Serial ports (COM1, COM2, …)

and Delta Tau USB products are present on this list.

When trying to communicate through an Ethernet port and the

IP address for the PMAC is not in the list, click New:

Select the Ethernet (Eth) option and click OK.

Enter the IP address of the controller. The Default IP address

for all Delta Tau Products is 192.6.94.5 . If you need to change

this default address, you can do so by using Configure

Ethernet 100BaseT software, which can be accessed from

PMAC Executive PRO 2 Suite / Delta Tau Common folder

under Start Menu.

After selecting the communication port with the controller, click OK.

The selected device is now added to the list, and it is referred as PMAC ##. You can have up to

32 PMAC devices defined on the software.

1 ... 30 31 32 ... 53

No comments

Delta Tau PMAC2 User Manual Page 31