Delta Tau PMAC2 User Manual download pdf (Page 11)

Turbo PMAC2 Realtime Express Controller

Hardware Setup

The controller is mounted to the back panel with four M4 screws and internal-tooth lock washers.

It is important that the teeth break through any anodization on the controller’s mounting gears to

provide a good electrically conductive path in as many places as possible. Mount the controller on

the back panel so there is airflow at both the top and bottom areas of the controller (at least three

inches).

Caution:

Units must be installed in an enclosure that meets the environmental IP

rating of the end product (ventilation or cooling may be necessary to

prevent enclosure ambient from exceeding 45° C [113° F]).

Mechanical Drawing

The figures below show the mounting dimensions of the controller.

Note:

For more detailed drawings (SolidWorks, eDrawings, DXF), visit our

website at http://www.deltatau.com.

1 ... 10 11 12 ... 53

No comments

Delta Tau PMAC2 User Manual Page 11