Geo MACRO Drive User and Reference Manual
Software Setup 65
Delta Tau: Turbo PMAC2 Ultralite = 603182 (MACRO Master)
Delta Tau: UMAC Turbo = 603382 (MACRO Master)
Delta Tau: UMAC MACRO 8 = 602804 (MACRO Slave)
Delta Tau: UMAC MACRO 16 = 603719 (MACRO Slave)
Delta Tau: Geo MACRO Drive = 603542 (MACRO Slave)
Delta Tau: ACC-65M = 603740 (MACRO Slave)
Delta Tau: ACC-68M = 603747 (MACRO Slave)
3. SID Serial ID (Range = 64 bit unsigned, 0=Serial ID not available)
4. $$$** - Station to reset to default parameter with no station number and ready for Ring location
identification.
Note
Do not use $$$***.
5. SAVE – Save station number and initialization parameters.
6. $$$ – Reset Station to saved station number and initialization parameters.
7. STN=n <n=0-254> – Assigns the MACRO station number. Normally, this would be its order in
the Ring. A STN=0 resets the station number and is reserved for the Ring Controller Master.
8. Commands with STN=0 is a broadcast to all stations in the ring.
9. Commands with STN=255 is a request for communication with the first station in the ring with its
STN=0.
10. Commands with STN=1-254 is a request for communication with the station in the ring with
STN=1-254.
11. STN – The addressed MACRO Station responds with its station number (n).
Comments to this Manuals