Delta Tau GEO MACRO DRIVE User Manual download pdf (Page 27)

Geo MACRO Drive User and Reference Manual

Receiving and Unpacking 15

RECEIVING AND UNPACKING

Delta Tau products are thoroughly tested at the factory and carefully packaged for shipment. When the

Geo Drive is received, do the following immediately.

1. Observe the condition of the shipping container and report any damage immediately to the

commercial carrier that delivered the drive.

2. Remove the drive from the shipping container and remove all packing materials. Check all shipping

material for connector kits, documentation, diskettes, CD ROM, or other small pieces of equipment.

Be aware that some connector kits and other equipment pieces may be quite small and can be

discarded accidentally if care is not used when unpacking the equipment. The container and packing

materials can be retained for future shipment.

3. Verify that the part number of the drive received is the same as the part number listed on the purchase

order.

4. Inspect the control for external physical damage that may have been sustained during shipment and

report any damage immediately to the commercial carrier that delivered the controller.

5. Electronic components in this amplifier are design-hardened to reduce static sensitivity. However,

use proper procedures when handling the equipment.

6. If the Geo Drive is to be stored for several weeks before use, be sure that it is stored in a location that

conforms to published storage humidity and temperature specifications stated in this manual.

Use of Equipment

The following guidelines describe the restrictions for proper use of the Geo Drive:

• The components built into electrical equipment or machines can be used only as integral components

of such equipment.

• The Geo Drives are to be used only on grounded three-phase industrial mains supply networks (TN-

system, TT-system with grounded neutral point).

• The Geo Drives must not be operated on power supply networks without a ground or with an

asymmetrical ground.

• If the Geo Drives are used in residential areas, or in business or commercial premises, implement

additional filter measures.

• The Geo Drives may be operated only in a closed switchgear cabinet, taking into account the ambient

conditions defined in the environmental specifications.

Delta Tau guarantees the conformance of the Geo Drives with the standards for industrial areas stated in

this manual, only if Delta Tau components (cables, controllers, etc.) are used.

1 2 ... 22 23 24 25 26 27 28 29 30 31 32 ... 204 205

No comments

Delta Tau GEO MACRO DRIVE User Manual Page 27